Skip to content
EN, Language
Check EECABook an Audit

Energy Services

Measurement & Verification (M&V)

Measurement & Verification of energy savings, delivered by CPMV-certified professionals (Certified Professional in Measurement and Verification, MGTC).

How it works

Electrical distributionFrom the utility transformer to the main switchboard, sub-boards and loads, with 2R's power logger at the incomer.
  1. Transformer (utility intake) · where the building takes power from the grid
  2. Main switchboard (MSB) · distributes power to the whole building
  3. Power logger · logs kW, kWh and power factor over days: Meatrol Mi550 / Fluke 430 Series II
  4. Load profile · the logged data shows when and where energy is used
  5. Sub-boards · feed each area or system, measured one by one
  6. Loads · chillers, motors, lighting: where the energy ends up

Illustration of typical systems, not a client's plant.

Projects

Projects for this service will be listed here as they are published.

Get this for your facility

Tell us about your building or plant and we'll recommend the right next step: an audit, an energy-saving project or EECA compliance support.

Book an Audit+603-8070 6751